Disability Stencil


The Height Option allows you to select the height of the actual symbol, all stencils with have a height and width of 1200mm. Our Disabled Parking stencil is available in a number of different sizes and thicknesses (see above). For similar stencils see our other road marking stencils. The height of the stencil is from the bottom of the symbol to the top of the symbol, there is a default bleed area provided to prevent over spray when marking, the height is the total height of the symbol, not the stencil. If you require a slightly different stencil see our custom stencils.

1.6mm Aluminium

    The Disabled Parking stencil is available in various sizes and is primarily used for road marking and car park applications. The height of the stencil is measured from the bottom to the top of the symbol. A default bleed area is included on the stencil to prevent over-spray. The width refers to the total width of the symbol, not the stencil itself. If you require any modifications or have specific needs, please feel free to contact us. We will be happy to assist you in arranging a custom stencil. It’s worth noting that our stencils are designed in compliance with Australian Standards. These standards state that each designated parking space should be identified by a white access symbol, as described in AS 1428.1. The symbol should be between 800 mm and 1000 mm in height and placed on a blue rectangle, with no side exceeding 1200 mm. The symbol should be placed as a pavement marking in the center of the space, approximately 500 mm to 600 mm from its entry point.


    1.4mm, 3mm

    Symbol Height

    800mm, 900mm, 1000mm